WINDOW Menu Sign

⚠️ Usage & Installation Precautions

  • Glass Surfaces Only: This product is designed exclusively for installation on glass surfaces.

  • Surface Cleanliness: Dirt, oil, grease, or moisture on the glass or component mounting surfaces will reduce adhesion and may cause the unit to fall. Before installation, thoroughly degrease with alcohol or wipe clean with water, and allow all surfaces to dry completely.

  • Sharp Metallic Edges: Due to the manufacturing process, the edges of silver and brass metal components may be sharp. Please handle with care during unpacking and installation; wearing protective gloves is recommended to prevent injury.

  • 24-Hour Adhesive Curing: The double-sided tape requires approximately 24 hours to cure completely. During this period, always secure the components temporarily with masking tape to prevent shifting or falling.

  • Avoid Printed Areas: When applying temporary tape, ensure it does not overlap with any printed text or graphics on the surface. Peeling off tape from printed areas may damage or peel away the print.

■ Package Contents

  • Indoor Part × 1: Base plate equipped with an insertion slot for menu sheets
  • Outdoor Frame Part × 1: Frame component mounted on the exterior side of the glass
  • Heavy-Duty Double-Sided Adhesive Tape for Glass × 8 strips (referred to as "double-sided tape" below)

Indoor Part

Outdoor Frame Part

■ Assembly Instructions

1. Clean the Mounting Surfaces
　Clean the glass surface and the adhesive-mating surfaces of both components (Indoor Part and Outdoor Frame Part).
　Thoroughly degrease with alcohol or wipe clean with water, then allow all surfaces to dry completely.

2. Apply Tape to the Indoor Part
　Apply the included double-sided tape strips along the three outer edges (lip) of the Indoor Part, ensuring they do not obstruct the paper insertion slot.
　Press firmly along the tape for approximately 30 seconds to bond securely, then peel off the release paper.

3. Mount the Indoor Part
　Align the Indoor Part to your desired position on the indoor side of the glass, then press it firmly against the glass for approximately 30 seconds
　to secure it in place.

4. Apply Tape to the Outdoor Frame Part
　Apply double-sided tape strips to the back surface (glass-contact side) of the Outdoor Frame Part in the same manner.
　Press firmly to bond, then peel off the release paper.

5. Mount the Outdoor Frame
　PartFrom the outdoor side of the glass, align the Outdoor Frame Part so that it perfectly overlaps with the Indoor Part on the inside,
　sandwiching the glass between them. Press firmly against the glass for approximately 30 seconds.

6. Temporary Support & Curing
　After mounting, the double-sided tape requires approximately 24 hours to cure completely.
　During this time, use masking tape to temporarily hold the parts in place and prevent shifting or falling.

　Note: Ensure temporary masking tape does not overlap with printed areas, as peeling it off may damage or pull away the print.

7. Insert the Menu Sheet
　After 24 hours have passed and the tape has fully cured, gently peel off the temporary masking tape. Slide your menu sheet into the slot of the Indoor Part.