How to Apply Your Vinyl Decal

How to Apply Your Vinyl Decal
1.Before removing the backing paper, position the decal where you want it and mark the position with masking tape or similar.

2.Peel back a few centimeters of the backing paper from one edge.
Line the decal up with your marks, then slowly apply it from that edge.


3.Smooth the decal down with a squeegee (or a plastic ruler) as you go, so no wrinkles or air bubbles form.
When you’re done, go over the whole decal again, pushing out any remaining air bubbles and pressing it firmly into place.


4.Make sure the decal is fully stuck to the surface, then slowly and carefully peel off the transfer tape.
(For a clean peel, pull the transfer tape back at a 45-degree angle while pressing it down from behind with the squeegee.)
