Cafe table
Package Contents
▼Set 1
Mounting Plate with Pole ×1
Base ×1
Adjusters ×4
Hex Nut (M16) ×1
Spring Washer (M16) ×1
Flat Washer (M16) ×1
Wood Screws ×8 *Not used
▼Set 2
Tabletop ×1
Screws ×8
Washers ×8
⚠️ Loose bolts can cause the table to wobble or rock.
Make sure all bolts are tightened firmly.
⚠️ Bolts may loosen over time and cause the table to wobble.
Check them regularly and retighten as needed.
▼Assembly Instructions
1. Place the mounting plate upside down. Turn the base upside down and fit it onto the pole.
Add the flat washer, spring washer and hex nut in that order, then tighten firmly.
2. Lay the tabletop upside down. Place the mounting plate face down on it, in the mounting position.
*Lay packing material or a soft cloth underneath to protect the tabletop from scratches.
3. Secure the mounting plate with the screws, then turn the table upright. Assembly is complete.
*Always turn the table upright with two or more people.
*If the table wobbles, adjust the adjusters on the ends of the legs.
