flatbasestandsign
SET CONTENTS
▼ set1
・Frame ×1
・Plate stopper ×2
・Flat base ×1
・Bolts small ×4
・Bolts large ×4
・Hex key ×1
▼ set2
・Replaceable printed panel
From left: Frame ×1 / Plate stopper ×2 / Flat base ×1
Bolts (small) / Bolts (large) / Hex key
⚠️ This item is large and heavy.
Always assemble with two or more people.
HOW TO ASSEMBLE
1. Attach the frame to the flat base
Align the frame with the flat base and tighten the four large bolts using the hex key.
2. Level the stand
If the stand wobbles when placed, turn the adjusters on the underside of the base to level it.
(Tighten all 4 points to assemble.)
(Level the stand using the adjusters.)
3. Insert the replaceable panel
Insert the panel diagonally from above, toward the groove at the lower inside of the frame.
* At this stage the panel is not yet secured. One person should hold it so it does not slip out.
4. Secure with the stoppers
Align the holes on the sides of the frame with the screw holes of the plate stoppers, and fasten with the small bolts — two points on each side, four points in total.
5. Assembly is complete once all four points are fastened.
