HOUSE NUMBER SIGN

Mounting Instructions
*Please have the installation carried out by a professional contractor.
*Please make sure the surface is suitable for mounting before installation.
*Adhesive is not included.
*Please choose an adhesive that is appropriate for the installation surface and environment.
① Decide on the installation location and mark the stud bolt hole positions on the wall.

② Drill a 30 mm deep hole with a Φ4-Φ4.2 drill bit at the marked location.
③ Clean the hole thoroughly with a vacuum cleaner, then inject the adhesive.

④ Insert the stud bolt and temporarily secure it with removable tape or similar.
⑤ Once the adhesive has completely hardened, slowly peel off the temporary tape to complete the installation.

