* For indoor or under-eaves use only.
* Product photos are adjusted to reflect the actual color as accurately as possible. However, due to differences in your environment (such as monitor settings or browser), the color you see may vary slightly from the actual product.
* Product color may appear different depending on placement and lighting conditions.
1. Remove any oil, moisture, dirt, or dust from the surface to be bonded.
2. Peel off the release liner from the back, attach the product, and press firmly for about 30 seconds. Then temporarily secure it with masking tape or similar, avoiding the engraved area. We recommend a curing period of at least 72 hours at room temperature.
3. After full curing, slowly remove the temporary tape.
* Be aware that after full curing, removal of the product may be difficult. We ask that you proceed with installation accordingly.
* Surfaces where the included double-sided tape cannot be applied.
- Uneven surfaces
- Surfaces such as wallpaper that are easily damaged or painted surfaces that peel easily
- Materials that are difficult to bond, such as PVC, rubber, polypropylene, polyethylene, etc.
- Surfaces with fluorine coating, silicone coating, or other treatments that make adhesion difficult
- Concrete or plaster walls