How to Apply Vinyl Decals

How to Apply Vinyl Decals

Please follow these steps to apply your vinyl decal cleanly and without air bubbles.

1. Before removing the backing paper, position the decal where you want to apply it and mark the placement using masking tape or similar.

2. Peel back a small section of the backing paper from one edge, align the decal and slowly apply it from one edge

3. Use a squeegee (or a plastic ruler) to smooth the decal as you apply it, working out any wrinkles and air bubbles.
Once fully applied, go over the entire surface again, pressing firmly and pushing out any remaining air bubbles for a secure adhesion.

4. Make sure the decal is fully adhered to the surface, then slowly peel away the transfer tape to finish.
(For best results, peel the transfer tape back at a 45° angle while pressing down on the decal with a squeegee or similar tool.)